GE wing tip wheel set V2
Art: GETW-02
Tip wheel set V2 for left and right wing.
The housing is made of GFK, finished in white 2K/PU paint.
Dimensions:
Bolts: M6
Length mounting surface: 150mm
Height mounting surface - axle center: 56 mm
Total height: 87 mm
Diameter wheell: 62,5 mm
Width wheel: 20 mm
Mounting screws Ø: 5mm
Mounting screws length: 30mm
Distance between mounting holes: 39mm
There is a slight mounting angle difference between the left and right wheel, which makes sure that when the wing is at rest on the ground (on either side) the wheel is positioned 90 degrees in correlation to the ground. So that their is no shearing load.
For the installation of the wheels you can apply resin.
The wheels can also be easily attached to the wing using our HPX tape (HT1902), which proves strong(er) than enough.
This tape can also serve to fill every shape of wing to fit any glider, for example by sticking an extra layer of tape in the middle of the tip wheel.
The housing is made of GFK, finished in white 2K/PU paint.
Dimensions:
Bolts: M6
Length mounting surface: 150mm
Height mounting surface - axle center: 56 mm
Total height: 87 mm
Diameter wheell: 62,5 mm
Width wheel: 20 mm
Mounting screws Ø: 5mm
Mounting screws length: 30mm
Distance between mounting holes: 39mm
There is a slight mounting angle difference between the left and right wheel, which makes sure that when the wing is at rest on the ground (on either side) the wheel is positioned 90 degrees in correlation to the ground. So that their is no shearing load.
For the installation of the wheels you can apply resin.
The wheels can also be easily attached to the wing using our HPX tape (HT1902), which proves strong(er) than enough.
This tape can also serve to fill every shape of wing to fit any glider, for example by sticking an extra layer of tape in the middle of the tip wheel.
- Manufacturer:
- Glider-Equipment
- Price Unit:
- per piece
- Dangerous Goods:
- No
