Trig TT22 Mode-S transponder class-I
Art: 00772-00
-12%
The Trig TT22 can fit into the smallest of aircraft – and yet it is fully certified and compliant with all the transponder requirements.
The TT22 is a two part transponder system, which includes an integrated altitude encoder. The TT22 is a Class 1 transponder. This means that you can use a TT22 if your plane is capable of flying above 15,000 feet or faster than 175 knots, VFR or IFR.
CAN BE LINKED TO TN70/TN72 GPS RECEIVER IN COMBINATION WITH TA50/TA70 ANTENNA FOR FULL ADS-B OUT.
The TT22 includes:
1x TC20 Transponder Controller [00649-00]
1x TT22 Mode S Transponder [00745-00-01]
1x Complete installation kit (incl. manuals)[00668-00]
1x Mounting tray [00667-00]
1x EASA Form 1
The complete installation kit includes:
1x TT21/TT22 Transponder installation manual [00560-00]
1x TT21/TT22 Pilots operating manual [00559-00]
2x Mounting adapter (circular hole adapter for 57mm holes) [00678-00]
1x Connector Co-axial TNC [00723-00]
1x Headshell, 9 way [00725-00]
1x Headshell, 25 way [00726-00]
1x 25 way D-type contact housing (male) [00728-00]
20x Crimp terminal, male, AWG 22-24 [00729-00]
1x 9 way D-type contact housing [00727-00]
9x Crimp terminal, female, AWG 22-24 [00730-00]
4x Long mounting screws, 4-40 thread [00736-00]
4x Short mounting screws, 4-40 thread [00737-00]
Additional items you will require, but which are not in the TT22 package, include:
- Antenna and fixing hardware. The TT22 is compatible with any transponder antenna approved to ETSO C74 or 2C112 or equivalent.
- Cables. You need to supply and fabricate all required cables.
- Fixings. To secure the transponder tray to the airframe you will need at least 3 flat head screws and three self-locking nuts. If the aircraft does not have existing mounting provisions you may need to fabricate additional brackets to support the transponder tray.
The TT22 can be mounted in a standard 57 mm (2¼ inch) instrument hole, or where space is really tight, in a compact mounting just 42 mm high.
-Low Weight - less than 500 grams!
-Minimal Panel Space
-Low Power Consumption
-250 Watts Nominal Output
-Integrated Altitude Encoder
-Simple Installation
-Support for 1090ES ADS-B Out
The TT22 connected to an appropriate GPS will make it compliant with the FAA final rule on ADS-B. The TT22 is TSO approved for fitting to European and FAA registered aircraft.
The perfect partner to TY91 and TY92 VHF radios.
Dimensions:
TT22 remote unit:
Height: 48mm (1.9”)
Width: 66mm (2.5”)
Length: 160mm (6.3”)
Weight: 350g (0.77lbs)
TC20 control head:
Height: 44mm (1.8”)
Width: 63mm (2.4”)
Length: 54mm (2.1”)
Weight: 90g (0.11lbs)
ALL TRIG PRODUCTS COME WITH A 2 YEAR WARRANTY FROM DATE OF PURCHASE
The TT22 is a two part transponder system, which includes an integrated altitude encoder. The TT22 is a Class 1 transponder. This means that you can use a TT22 if your plane is capable of flying above 15,000 feet or faster than 175 knots, VFR or IFR.
CAN BE LINKED TO TN70/TN72 GPS RECEIVER IN COMBINATION WITH TA50/TA70 ANTENNA FOR FULL ADS-B OUT.
The TT22 includes:
1x TC20 Transponder Controller [00649-00]
1x TT22 Mode S Transponder [00745-00-01]
1x Complete installation kit (incl. manuals)[00668-00]
1x Mounting tray [00667-00]
1x EASA Form 1
The complete installation kit includes:
1x TT21/TT22 Transponder installation manual [00560-00]
1x TT21/TT22 Pilots operating manual [00559-00]
2x Mounting adapter (circular hole adapter for 57mm holes) [00678-00]
1x Connector Co-axial TNC [00723-00]
1x Headshell, 9 way [00725-00]
1x Headshell, 25 way [00726-00]
1x 25 way D-type contact housing (male) [00728-00]
20x Crimp terminal, male, AWG 22-24 [00729-00]
1x 9 way D-type contact housing [00727-00]
9x Crimp terminal, female, AWG 22-24 [00730-00]
4x Long mounting screws, 4-40 thread [00736-00]
4x Short mounting screws, 4-40 thread [00737-00]
Additional items you will require, but which are not in the TT22 package, include:
- Antenna and fixing hardware. The TT22 is compatible with any transponder antenna approved to ETSO C74 or 2C112 or equivalent.
- Cables. You need to supply and fabricate all required cables.
- Fixings. To secure the transponder tray to the airframe you will need at least 3 flat head screws and three self-locking nuts. If the aircraft does not have existing mounting provisions you may need to fabricate additional brackets to support the transponder tray.
The TT22 can be mounted in a standard 57 mm (2¼ inch) instrument hole, or where space is really tight, in a compact mounting just 42 mm high.
-Low Weight - less than 500 grams!
-Minimal Panel Space
-Low Power Consumption
-250 Watts Nominal Output
-Integrated Altitude Encoder
-Simple Installation
-Support for 1090ES ADS-B Out
The TT22 connected to an appropriate GPS will make it compliant with the FAA final rule on ADS-B. The TT22 is TSO approved for fitting to European and FAA registered aircraft.
The perfect partner to TY91 and TY92 VHF radios.
Dimensions:
TT22 remote unit:
Height: 48mm (1.9”)
Width: 66mm (2.5”)
Length: 160mm (6.3”)
Weight: 350g (0.77lbs)
TC20 control head:
Height: 44mm (1.8”)
Width: 63mm (2.4”)
Length: 54mm (2.1”)
Weight: 90g (0.11lbs)
ALL TRIG PRODUCTS COME WITH A 2 YEAR WARRANTY FROM DATE OF PURCHASE
- Manufacturer:
- Trig
- Price Unit:
- per piece
- Dangerous Goods:
- No
